Radon in Austin Homes: What Buyers Need to Know
Radon in Austin homes: what the EPA's 4 pCi/L action level means, how to test during the option period, what a fix costs and how to confirm it worked.
Radon in Austin Homes: What Buyers Need to Know

Radon is an invisible, odorless radioactive gas that seeps up from soil and rock, and Travis County’s granite-rich ground makes it worth testing for in any Austin home you are serious about, new or old, modest or luxury. The test is inexpensive and fits inside the option period. A high reading is a solvable, priced problem, not a reason to walk away from a house you love. As a buyer’s team in Austin, we want you to see the number before you commit, and the steps below show how.
TL;DR
- Radon is a naturally occurring gas with no known safe level. It can build up in any home, with or without a basement.
- The EPA recommends fixing a home at 4 pCi/L or higher and considering a fix between 2 and 4 pCi/L.
- Texas does not require a radon test before a sale, so you have to ask for one. Schedule it at the start of your option period.
- A professionally installed sub-slab system typically cuts radon by 80 to 99 percent. Air purifiers are not the answer.
Table of Contents
- Why Austin buyers should take radon seriously
- What counts as a high radon level
- How to test during an Austin purchase
- What mitigation involves and what it costs
- New construction and radon
- Using the result in your negotiation
- Our perspective
- Working with us on your Austin purchase
- FAQ
- Sources
Why Austin buyers should take radon seriously
The EPA says radon is the number one cause of lung cancer among non-smokers and estimates it causes about 21,000 lung cancer deaths each year in the U.S. The CDC adds that smoking in combination with radon raises the risk further, and that the highest exposure usually happens on the lower levels of a home, where people spend the most time.
Austin has a local reason to pay attention. Travis County sits on the 1993 EPA map as Zone 3, the lowest-risk category, but the EPA itself says that map should not be used to decide whether an individual home needs testing. A Texas Tech University study of 11,504 single-family home test records from 2006 to 2020 found that the Central Texas Uplift, the region that includes Austin, showed indoor levels two to three times higher than the 1991 EPA screening data. Local testing specialists also point to granite beneath parts of Travis County and tightly sealed, air-conditioned homes as reasons individual readings can run high.
Two things follow for a buyer. First, a neighbor’s result tells you little about the house you are buying. Second, a home’s price, age or finish says nothing about its radon level. A new luxury build on a hillside and a 1960s ranch in Tarrytown both need the same simple test.
What counts as a high radon level
Radon is measured in picocuries per liter of air (pCi/L). Here is how the EPA frames it, according to its action-level page:
| Result | What it means |
|---|---|
| Below 2 pCi/L | Below the range where the EPA suggests considering a fix |
| 2 to 4 pCi/L | The EPA suggests considering a fix |
| 4 pCi/L or higher | The EPA recommends fixing the home |
For context, the EPA puts the average U.S. indoor level at about 1.3 pCi/L. Because no level is known to be completely safe, a reading of 3 is a conversation to have with your team and the seller, not something to ignore.
How to test during an Austin purchase
Texas does not require a radon test before a sale, and the state has no license requirement for radon testers or mitigators, as the AARST Texas report card lays out. That puts the decision in your hands. The steps below follow the EPA’s 2024 buyer’s guide.
1. Ask what is already known
The EPA recommends that buyers ask the seller for any radon test results and information on a radon-reduction system. Under Texas Property Code §5.008, sellers of single-unit residential property must give a written disclosure notice that covers radon, but the duty is limited to what the seller actually knows. A seller who never tested has nothing to report, so “no known issues” on the form does not mean a low reading. Our guide to the Texas property disclosure and the 7-day termination window explains how that notice fits into your timeline.
2. Build testing into the option period
In a Texas contract, your right to terminate comes from the option period you pay for, and there is no automatic cooling-off period afterward. That is why radon testing belongs on day one, alongside the general inspection. A short-term test needs 48 hours at minimum, so ordering it late can leave you with results after your window has closed. Our overview of home inspection services in Austin covers how the inspection side of the period usually runs.
3. Choose a valid test method
For real estate transactions, the EPA’s guide accepts three short-term approaches: two simultaneous passive tests of at least 48 hours, two sequential 48-hour tests with identical devices, or one continuous monitor running at least 48 hours. The test goes in the lowest level of the home that you could regularly use, such as a finished lower floor or a ground-floor bedroom on a slab.

If you want an engineer’s eye on how a property is assessed during a transaction, a professional engineer inspection for property transactions shows the scope such inspections can cover.
4. Keep the test conditions clean
For tests shorter than four days, the EPA says to close windows and outside doors at least 12 hours beforehand and keep them closed except for normal entry and exit. Interference or disturbance can invalidate the result. Austin summers help here: with the air conditioning running and windows shut, the house is already close to test conditions, which is also why radon can concentrate indoors in that season.
On vacant luxury properties, confirm that someone will not open doors or run whole-house fans during the test. Out-of-state buyers should make sure the seller’s agent knows the test dates in advance.
5. Read the result and decide
The CDC advises that if a short-term test is above 4 pCi/L, you take a second short-term or long-term test, and that a licensed professional should install a reduction system if the average of two short-term tests, or any long-term test, is 4 pCi/L or higher. Home kits are inexpensive, typically under $30 for short- and long-term versions, and the American Lung Association recommends retesting at least every two years when levels are below 2 pCi/L. For a purchase, though, a documented test run within your option period is what gives you something to negotiate with.
What mitigation involves and what it costs
Most fixes use sub-slab depressurization: a pipe runs through the foundation into the gravel or soil below, and a fan pulls the gas out and vents it above the roofline. The EPA’s buyer’s guide says sealing cracks alone has not been shown to lower radon significantly or consistently, and recommends a licensed professional install the system at levels of 4 pCi/L or above. The federal health agency ATSDR says active soil depressurization can reduce indoor radon by as much as 99 percent.

On cost, EPA research found that contractor-installed soil depressurization in existing homes typically cut radon 80 to 99 percent at $800 to $2,500, with annual operating costs of $75 to $175. Those are 1994 figures, so expect today’s quotes to run higher and to vary with foundation type and house size. Get written quotes from several mitigators.
Two practical points for Austin buyers:
- Verify the fix. A confirmation test after installation shows whether the system brought the home under the action level.
- Skip the shortcuts. Ventilation is only a temporary strategy, and the EPA does not recommend air cleaning to reduce radon. Air cleaners without special media such as activated carbon will not remove gases like radon at all.
New construction and radon
Many of our buyers are looking at pre-construction and new builds, where a fix is easiest to plan. The EPA’s guide says that for new homes you should ask whether radon-resistant features were used. Texas has no requirement for radon systems in new homes, so the answer depends on the builder. The EPA’s research puts passive systems installed during construction at about $350 to $500, a fraction of a retrofit. Even with such a system in place, test after you move in, since a passive system is a starting point and not a measurement. If you are weighing a build, our page on new construction in Tarrytown shows what that market looks like.
Using the result in your negotiation
A documented elevated reading gives you three typical paths: ask the seller to install and pay for a mitigation system, ask for a credit at closing, or use the option period to terminate if the terms do not work. Local testing specialists note that sellers generally respond reasonably to documented radon results because mitigation is a defined, priced repair. Bring the written test report and mitigator quotes together, and the conversation stays about numbers.
If you are buying as an investor, the same logic applies to rental properties: a low-cost fix and a clean confirmation test protect tenants and your resale. Our investment tips for Austin buyers cover the wider due-diligence picture.
Our perspective
Most of the buyers who call us are relocating from another state, often flying in for a weekend and making a major decision quickly. In that rush, radon is the item that slips, because you cannot see it, smell it or notice it on a showing.
We come to Austin homes with an architectural background, so we look at how a house sits on its site, how the slab and foundation are built and what that means for a buyer. For us, radon testing is part of the same careful evaluation as the structure and the systems. It is cheap, it fits in the option period, and it turns an unknown into a number you can negotiate.
Our private and off-market listings often move fast, which makes planning matter more. Know your test window before you write an offer, and you will not have to choose between speed and certainty.
Mike
Working with us on your Austin purchase
Mogavero Group represents buyers and sellers of luxury homes in Austin, with more than 20 years of experience and a focus on off-market and pre-construction opportunities. If you are buying from out of state, our buyer representation is built around personalized guidance through the complexities of the Austin market, and private listing access shows you homes the general public does not see. If you are selling, our seller representation covers valuation and marketing. Our luxury home buying tips are a good next read.
FAQ
Is radon a problem in Austin?
It can be. Travis County is rated Zone 3 on the EPA’s 1993 map, but the EPA says not to use that map to decide on testing a particular home. Texas Tech’s study found Central Texas levels two to three times higher than 1991 screening data, so test the specific house.
What radon level is too high?
The EPA recommends fixing a home at 4 pCi/L or higher and considering a fix between 2 and 4 pCi/L. There is no known safe level of radon.
Does Texas require a radon test when you buy a home?
No. Texas does not require testing before a sale. Sellers must disclose radon only if they know about it, so buyers who want certainty should order a test in their option period.
Can an air purifier remove radon?
No. The EPA does not recommend air cleaning for radon, and air cleaners without special media such as activated carbon will not remove gases like radon. Source-control systems such as sub-slab depressurization are the recommended approach.
How do I confirm a radon fix worked?
Run a follow-up test after the system is installed. The CDC advises a licensed professional for installation when results are at or above 4 pCi/L, and retesting afterward shows the result.
Sources
- Radon and Your Health, CDC
- Testing Your Home for Radon, CDC
- Basic Radon Facts, EPA (January 2023)
- EPA Map of Radon Zones and Supplemental Information
- What is EPA’s Action Level for Radon
- Home Buyer’s and Seller’s Guide to Radon, EPA (March 2024)
- Clinician Brief: Radon, ATSDR
- Texas Indoor Radon Map 2020 Update, Texas Tech University
- Radon Mitigation Research, EPA
- Residential Air Cleaning Devices, EPA
- Radon Mitigation, American Lung Association
- Database of State Indoor Air Radon Laws, Environmental Law Institute
- Texas Report Card, AARST
- Frequently Asked Questions, TREC
- Radon Testing in Austin, Dallas, and Houston
Recommended
By Mike Mogavero · Mogavero Group at Compass